Epson TM-C3400 Label Unwinder with 3" Core Holder


Usually ships within 24 hours
25.00 LBS
Calculated at Checkout

Epson TM-C3400 Label Unwinder with 3" Core Holder


The position of the tension arm is calibrated as follows:
a) When the printer forwards the media for printing, the tension arm goes up, the device unwinds the media.
b) When the tension arm is in the middle position, the device is idle.
c) When the printer pulls back the media, the tension arm goes down, the device rewinds it.

Core Diameter: 3" Fixed Core Holder
Label Width: 5"
Roll Diamter: Max. 10" outside diameter

An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tension arm, the adjustment of the rotation’s speed and rotation’s direction. A 2A fuse is used as protection.