Epson TM-C3500 Label Unwinder with 3" Core Holder


$799.00 $649.00
(You save $150.00)
Usually ships within 24 hours
25.00 LBS
Calculated at Checkout

Epson TM-C3500 Label Unwinder with 3" Core Holder

The position of the unwinders tension arm is calibrated as follows:
a) When the printer forwards the media for printing, the tension arm goes up, the device unwinds the media.
b) When the tension arm is in the middle position, the device is idle.
c) When the printer pulls back the media, the tension arm goes down, the device rewinds it.

Core Diameter: 3" Fixed Core Holder
Label Width: 5"
Roll Diamter: Max. 10" outside diameter

An external power supply 100/240VAC - 2.5A at 24V allows an electronic circuit to provide, through the tension arm, the adjustment of the rotation’s speed and rotation’s direction. A 2A fuse is used as protection.


This label unwinder can be used with the following label printers:

  • Epson TM-C3400 color label printer
  • Epson TM-C3500 color label printer
  • Epson TM-C7500, Epson C6000 and Epson C6500 color label printer
  • QuickLabel Kiaro
  • Direct Thermal label printers
  • Thermal Transfer label printers

With this label unwinder you are able to use larger 8" OD to 10" OD label rolls with your printers.